Reinforced concrete column-steel beam (RCS) composite structures are widely used in super highrise buildings due to their excellent performance. In this paper, the numerical simulation analysis of the RCS hybrid joints of “beam through” and “column through” RCS constructed with steel hoop structure are carried out, and the influence of five different parameters, i. e. , flange width-thickness ratio, steel yield strength, axial compression ratio, concrete strength and end plate thickness, on the seismic performance and failure mode of RCS hybrid joints is investigated. The results show that the ABAQUS finite element model can simulate the performance of RCS mixing under static load through reasonable parameter settings, which is in good agreement with the experimental results. Under the mechanism of “strong column and weak beam”, the combined node firstly undergoes beam-hinge damage, and the change of the axial compression ratio and the concrete strength parameter of the joint have little effect on the ultimate bearing capacity and deformation performance of the joint. Increasing the flange width-thickness ratio reduces the bearing capacity of the joint by up to 11%, and increases t
📖 افتح في inklap 🔗 DOI 📮 اطلب بحثاً