COMPARISON OF FIBER CONCRETE PROPERTIES FOR INDUSTRIAL FLOORS AND ROAD PAVEMENTS WITH STEEL AND POLYPROPYLENE FIBER

The article presents a comparative analysis of the type of dispersed reinforcement effect with steel fiber produced by «Stalkanat-Silur» (50 mm length, ⌀1 mm) and polypropylene fiber «Baumesh» produced by BAUTECH-Ukraine LLC (36 mm length, ⌀0.68 mm) on physical and mechanical properties and failure mode of fiber-reinforced concrete samples for cement concrete pavements and industrial floors. The indicators of strength and durability as one of the most important concrete properties for pavement structures, that are constantly operate under the influence of high dynamic loads were determined. The possibility of using the studied compositions of concrete with structural fiber of different types is analyzed. All concrete mixtures had equal workability S4. For fiber-reinforced concrete mix preparation, Portland cement ПЦ II/А-Ш-500 (CEM II/A-S 42.5 R), crushed stone 5-20 mm and sand with a fineness modulus of 2.75 were used. Polycarboxylate superplasticizer MC-PowerFlow 3200 was used to achieve the required workability of fiber concrete mixtures. It has been established that the use of dispersed reinforcement increases the concrete compressive strength by 13-16%, flexural strength inc