AbstractLinear actuators are used in various industrial applications. Conventional linear actuators are a combination of a rotational motor and a ball screw, a hydraulic actuator, or a linear motor. However, these actuators have some demerits. This paper proposes a spiral motor (SPRM) that comprises a helical stator and a helical mover. Owing to its helical structure, the SPRM can be expected to show better performance compared to the conventional linear actuator. A stator and a mover are shown in Figs. 1 and 2, respectively. Helical motion is obtained by this motor and only linear motion is extracted by canceling rotational motion at the end effector. There are two types of SPRMs. One has no ball screw on the output axis, while the other has a ball screw. The former can be used in a direct drive system. However, the gap between the stator and the mover should be controlled because the motor is a magnetic levitation system without a ball screw. Further, the motor requires two three‐phase inverters. The other motor is easy to control because it does not require gap control. However, the motor is inferior to the first motor with regard to position control since the friction in this m
📖 افتح في inklap 🔗 DOI 📮 اطلب بحثاً